3.2 Calculating the dRSS
3.2.1 Victim link
The victim parameter characteristics summarised in Table 6 should be entered into SEAMCAT. Tabl...
3.2.2 System to be a victim
In order to set up a workspace, the first step is to set the system that will be used as victim: ...
3.2.4 Transmitter
Set now the victim link transmitter by selecting the transmitter tab Figure 74: Selecting the tr...
3.2.5 Positioning the VLT vs VLR
Define now the positions of transmitters and receivers of the victim link. Figure 76: Selecting ...
3.2.6 Selecting the propagation model
Since both the transmitter and the receiver characteristics and the location between the two have...
3.2.7 Calculating the dRSS by hand
Using the Free space equation, the power received by the Victim link receiver (dRSS) can be easil...
3.2.8 Export/import your system to library
When setting the system is complete, it is possible to export it to the library, so it can be reu...
3.2.9 Selecting the victim in the Scenario
Now it’s time to create the victim link. The only thing needed is to select a system to be used a...