8.2 CDMA system tab

Introduction
Whether you want to simulate CDMA UL (uplink) or CDMA DL (downlink), you can import from the system library (Figure 186 – (a)), the cellular system you want (Figure 186 – (b)). You can also export  the characteristics of your CDMA network to the library for later reuse.  
 
 Figure 186: Selection of a CDMA cellular network from the system library

8.2.1 System
You can name and write some description of the CDMA system you want to simulate. It is the same layout as when a generic system is selected.

8.2.2 General
You can enter the frequency. The frequency value is overwritten at the “Scenario” tab level. 
  Table 26: General system panel 
 
 
 
 
 
 
 
 Description 
 
 
 Symbol 
 
 
 Type 
 
 
 Unit 
 
 
 Comments 
 
 
 
 
 Frequency 
 
 
 f 
 
 
 Distribution or Scalar 
 
 
 MHz 
 
 
 Distribution of the centre frequency of the system 
 
 
 
 
 
 
 It is used to define the necessary parameters for the modelling of  CDMA systems. The CDMA interface has been split into 2 tabs.