3.6.2 Translation calculation mode

When the Translation mode is chosen, it is possible to calculate and display a chart of the probability of interference as a function of one of the following input parameters: 
 
 
 Output power of Interefering link transmitter; 
 
 
 Blocking response level of Victim link receiver; 
 
 
 Intermodulation response level of Victim link receiver. 
 
 
   
 The translation function, as shown as ( #1 ) Figure 98 in, allows investigation of the probability of interference for varying power supplied ( #2 ) to the interefering link transmitter. The power supplied ( #3 ) to the interfering link transmitter should be equal to 15 dBm, which is 18 dB below the value used in the simulation (33 dBm). Effectively the C/I will be increased by 18 dB and reaches the level of 19 dB. 
   
 
 Figure 98: Translation function