# 3.6.2 Translation calculation mode

When the Translation mode is chosen, it is possible to calculate and display a chart of the probability of interference as a function of one of the following input parameters:

- Output power of Interefering link transmitter;
- Blocking response level of Victim link receiver;
- Intermodulation response level of Victim link receiver.

The translation function, as shown as (**\#1**) Figure 98 in, allows investigation of the probability of interference for varying power supplied (**\#2**) to the interefering link transmitter. The power supplied (**\#3**) to the interfering link transmitter should be equal to 15 dBm, which is 18 dB below the value used in the simulation (33 dBm). Effectively the C/I will be increased by 18 dB and reaches the level of 19 dB.

![image.png](https://wiki.cept.org/uploads/images/gallery/2026-04/scaled-1680-/JEhqtdaJpHecNOrm-image.png)

**Figure 98: Translation function**