# 3.2.9 Selecting the victim in the Scenario

Now it’s time to create the victim link. The only thing needed is to select a system to be used as victim link as shown in (**\#1**) of Figure 83 under the “scenario” tab.

Note that the frequency field at the “scenario” tab level overwrites what was predefined at “system” tab level (**\#2**).

![image.png](https://wiki.cept.org/uploads/images/gallery/2026-04/scaled-1680-/Z11FqCJuIHVW6va0-image.png)

**Figure 83: Setting the system of your choice to be the victim link in the “scenario” ta**b