# Introduction When the cognitive radio mode is activated, SEAMCAT resturns the output vector shown in Figure 251 and described in Table 52.
![](blob:https://ecowiki.atlassian.net/ccbb7a3a-7a9a-44cb-9228-616513b35cdd#media-blob-url=true&id=86e87945-3d36-4a87-8d2a-92120e1591cf&collection=contentId-512127&contextId=512127&width=652&height=145&alt=&clientId=113268fe-fe5b-4bc3-8ff3-07965dbf1d18)
[![image.png](https://wiki.cept.org/uploads/images/gallery/2026-04/scaled-1680-/h1JpLNISjv9cF2w6-image.png)](https://wiki.cept.org/uploads/images/gallery/2026-04/h1JpLNISjv9cF2w6-image.png)
**Figure 251: Output vector for the CR**
**Table 52: Output results for CR simulation**
**\#** **Item** **Description**
1 sRSS sRSS value calculated at the selected WSD frequency (i.e. where the WSD is allowed to transmit) for each of the event
2 WSD frequency The actual selected frequency at which the WSDs are allowed to transmit as the result of the spectrum sensing algorithm
3 WSD e.i.r.p. The actual selected e.i.r.p. at which the WSDs are allowed to transmit as the result of the spectrum sensing algorithm
4 Victim frequency frequency at which the victim device transmits per event
5 Average e.i.r.p. per event x active WSDs (for each frequency) average e.i.r.p. per event for all the active WSDs transmitting at a certain frequency
6 Average Active WSD per event (for each frequency)
At the end of the simulation, SEAMCAT provides a set of output vectors as above. Then you can perform the interference probability calculation as previously described.