Introduction
When the cognitive radio mode is activated, SEAMCAT resturns the output vector shown in Figure 251 and described in Table 52.
|
# |
Item |
Description |
|
1 |
sRSS |
sRSS value calculated at the selected WSD frequency (i.e. where the WSD is allowed to transmit) for each of the event |
|
2 |
WSD frequency |
The actual selected frequency at which the WSDs are allowed to transmit as the result of the spectrum sensing algorithm |
|
3 |
WSD e.i.r.p. |
The actual selected e.i.r.p. at which the WSDs are allowed to transmit as the result of the spectrum sensing algorithm |
|
4 |
Victim frequency |
frequency at which the victim device transmits per event |
|
5 |
Average e.i.r.p. per event x active WSDs (for each frequency) |
average e.i.r.p. per event for all the active WSDs transmitting at a certain frequency |
|
6 |
Average Active WSD per event (for each frequency) |
|
At the end of the simulation, SEAMCAT provides a set of output vectors as above. Then you can perform the interference probability calculation as previously described.