1.4.10 Interference calculation
SEAMCAT calculates the probability of interference for generic (i.e. non-cellular) victim systems. Each sample of dRSS and iRSS generated during a simulation is compared against the relevant signal-to-noise criterion (specified in the scenario, such as C/N, C/N+I etc). The probability of interference is calculated for all events where the dRSS is greater than the sensitivity of the victim link receiver (dRSS > sens). This probability can be calculated for two different modes, as illustrated in Figure 271 of section 12.9.2.
-
Compatibility: This mode provides a single-figure estimate of the probability of interference in a given interference scenario;
-
Translation: This mode calculates probability of interference as a function of changing one of the following parameters:
-
Transmitter power of the interefering link transmitter;
-
Blocking response level of the victim link receiver;
-
Intermodulation rejection level for the victim link receiver
